LED microwave sensor tube for parking lot

LED Microwave sensor LED tube light introduction:

LED microwave sensor tube is using the Doppler principle, emitting around 5.8GHz microwave radar signal, we usually call it LED radar tube, LED sensor tube, LED garage tube etc.

We have below size available for choosing: 2FT 9W, 3FT 14W, 4FT 18W, 5FT 23W. LED microwave tube is available in single end or dual side ended.

When a moving object enters into the radar's electromagnetic field (5-10M, it is adjustable), the Microwave sensor can be a feedback signal to the receiver circuit, the circuit thereby to trigger a change of operating state. Generally sensing distance/triggering distance can be up to 5-10 meters,

As long as the object moves can be triggered. Although the object within its trigger range, if it doesn’t move, it is still not triggered. Radar sensors can penetrate

Non-metallic objects, such as gypsum board, wood, etc., especially suitable for concealed installation. If there are metal objects away from the emitting surface,

it will greatly reduce its sensitivity, should pay special attention to this point. The effects of radar interference induced by relatively small,

and the sensitivity and relatively high, particularly suitable for underground parking lot lighting solutions, lobby, warehouse etc.

Advantage of LED microwave induction T8 tube radar sensor LED light.

1. New technology, sensor and smart IC are integrated inside tubes, no need additional ballast.

2. Special internal isolated power supply design, available from 9W to 23W, adjustable in delaying time, sensor area, Min watt. 100% high voltage- resistance test, safer.

3. No ambient temperature nor noise interruption like PIR or voice-controlled, sensor area at least 10m.

4. Special gridding circuit design, any individual LED failure will not cause other LEDs working.

5. Saving up 90% more than fluorescent tube, 60% more than normal LED T8.

Principle of Radar LED sensor tubes light 9W(2FT), 14W(3FT), 18W(4FT), 23W(5FT),

1. Radar controlled, test ambient movement intelligently, auto-adjust work state.

2. When you are driving a car closer and closer (5-10meters, adjustable), auto-sensor receive signal and transmit to let light fully work at 18W, its illumination equals to 40W fluorescent.

3. After your car parked and you left, auto-sensor will automatically turn down at 4-5W(adjustable) for energy saving.

Take the 4FT LED microwave tube as example, usually when there is a person enter into the sensor area, the tube will be in full wattage 18W, when there is a person out of the sensor

area, the radar tube will be in 4W, the delay time is around in 30S, sometimes the customer may need it in 60S.

led mircorwave tube for packing lot Greenough

Applications:

1. Car Parks.

2. Staircases.

3. Corridors.

4. Walkways.

5. Lobbies.

Download Collection Catalogue